Kenwood CMOS-320 – Front or Rear View Camera
Universal multiview camera for front and rear installation
The Kenwood CMOS-320 is a universal CMOS color camera, ideally suited as a front and rear camera. Selectable viewing angles provide a complete overview of the front and rear of the vehicle via a monitor, ensuring a high level of safety. Further advantages of the camera include its very small dimensions and waterproof housing. Thanks to the use of a CMOS chip, the camera boasts high light sensitivity, enabling short exposure times and ensuring reasonable image quality even in twilight. In addition to normal and mirrored views, the CMOS-320 offers four other viewing options: Night, Wide, Overhead, and Corner.
Highlights
- Universal multiview camera for front and rear installation
- Night, Normal, Wide, Overhead, Corner View
- Switch unit included
- 1/3.6″ CMOS color camera
- Waterproof housing with flexible installation options
- NTSC video signal
- Can be installed as a front or rear camera.
Camera technical specifications
- Camera model 1/3.6″ CMOS color camera
- Color reproduction: Yes
- Number of pixels (approx.) 330000
- High light sensitivity: Yes
- Video output signal: Wide-angle mirror image (for rear view) / Wide-angle normal image (for front view)
- Waterproof housing: Yes
- Assembly and installation: flexible installation options
- Installation positions on the back
- Camera ID input: Yes
- Switching the reversing sensor
- Switchable to front view via wired remote control or appropriately equipped Kenwood component
- Orientation guidelines: Yes
- Guidelines for adjusting size, horizontal direction, red line position
- Image adjustment: Center, Left and Right, Up and Down
- Surge protection: Yes
- Wide-angle lens: Yes
- Focal length f: 1.05mm, aperture (f-value) 2
- Horizontal viewing angle +/- 195°
- Vertical viewing angle +/- 145°
- Light sensitivity from approximately 0.9 to 100,000 lux
- electronic aperture
- Automatic white balance
- Sampling principle Interlaced scanning
- Synchronization internal synchronization
- Video output 1Vpp, 75Ω
- Video signal format NTSC (Mirror view)
- Connection cable (power supply + video connection), cable length 9 m
Technical Data General
- Operating voltage 14.5 V (9 ~ 16 V permissible)
- Maximum current draw 0.1A
- Dimensions of the switch unit: 27.5 x 32.8 x 12 mm
- Weight of the switch unit: 10 g.
- Dimensions (W x H x D) 23.4 x 23.4 x 26.1 mm
- Weight 23 g.
- Operating temperature range -30°C ~ 70°C
- Storage temperature -40°C ~ 80°C
Reviews
There are no reviews yet.