Tool trolley tool case, toolbox with carrying handle and telescopic handle

Description

Item description
Article no. S000M0BH
One for everything!
Aluminum tool case with 1200 pieces
Tool is housed on 4 levels
Trolley with 2 snap fasteners with locks, rollers and telescopic handle for pulling
Weight: approx. 12 kg

Weniger anzeigen
Practical trolley tool case with 1200 parts.
Technical details

Total dimensions: approx. 37 x 20 x 100 cm
Suitcase dimensions: approx. 37 x 18 x 47 cm
Weight: approx. 12 kg
Material: aluminum
Scope of delivery

1 tool case 1200 pieces
2 keys
Compartment 1

1 roll-cable wrench
1 side cutter
1 water pump pliers
1 sharpening pliers
1 fork ring wrench 17 mm
1 fork ring wrench 14 mm
1 fork ring wrench 10 mm
1 fork ring wrench 6 mm
1 fork ring wrench 8 mm
1 fork ring wrench 11 mm
1 fork ring wrench 13 mm
1 fork ring wrench 15 mm
300 cable ties
1 pack of wooden dowels
1 pack of nails, hooks, wire
Compartment 2

2 brackets
1 small parts box (screws, nails,…)
1 hammer
1 Crimean pliers
1 tape measure
1 spirit level
2 Hot glue cartridge
1 hot glue gun
1 insulating tape
1 bit set (SL3, SL4, SL5, SL6, SL7, PH0, PH1, PH2, PH3, PH4, PZ1, PZ2)
Compartment 3

1 screwdriver cross
1 screwdriver cross
1 screwdriver cross
1 screwdriver slot
1 screwdriver slot
1 screwdriver slot
1 screwdriver cross
1 screwdriver slot
1 screwdriver cross
1 Knirps screwdriver cross
1 ratchet screwdriver with bit attachment
1 Knirps screwdriver slot
1 current test screwdriver
1 fully insulated screwdriver cross
1 fully insulated screwdriver slot
1 fully insulated screwdriver slot
1 precision screwdriver set
1 bit set (PH0, PH1, PH2, PH3, SL3, SL4, SL5, SL5, T25, T27, T30, T40)
1 bit set (H3, H4, H5, H6, H7, PH0, PH1, PH2, PH3, PH3, PZ1, PZ2
1 bit set (T10, T15, T20, T25, T30, T40, PH1, PH2, PH3, PH1, PH2, PH3)
1 bit set (PZ0, PZ1, PZ2, PZ3, PZ3, PH0, PH1, PH2, PH2, PH3, PH3, ¼ inch adapter)
1 hexagon socket set
1 hexagon socket set
1 magnet
1 bit holder
1 hook screwdriver
Compartment 4

1 extension ¼ inches
1 short extension ¼ inches
1 universal joint ¼ inches
1 spark plug nut 16 mm
1 spark plug nut 21 mm
1 ¼ inch nuts: 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5.8, 9, 10, 11, 12, 13, 14 (mm)
1 ½ inch nuts: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 30(mm)
1 Flexible extension ¼ inches
1 screwdriver with ¼ inch attachment
1 ½ inch ratchet
1 ¼ inch ratchet
1 T Gag ½ inch
1 ½ Customs extension
1 T Gag ¼ inch
1 Flexible extension ½ inches
Product information

Reference to ElektroG

Information on electrical and electronic (old) equipment

The following information is intended for private households using electrical and/or electronic equipment. Please note these important information in the interest of environmentally friendly disposal of old devices and your own safety.

1. Instructions on the disposal of electrical and electronic (old) equipment and the meaning of the symbol according to Annex 3 to the ElektroG

Owners of old devices must record them separately from unsorted municipal waste. Waste electrical and electronic equipment must therefore not be disposed of as unsorted municipal waste and, in particular, should not be included in household waste. Rather, these old devices are to be collected separately and disposed of, for example, through the local collection and return systems.

Owners of old devices must also separate old batteries and accumulators that are not enclosed by the old device, as well as lamps that can be removed non-destructively from the old device, before they are delivered to a detection point. The latter does not apply if the old devices are separated from other old devices in accordance with Section 14 Paragraph 4 Sentence 4 or Paragraph 5 Sentence 2 and 3 ElektroG as part of the opting by the public waste disposal authorities for the purpose of preparation for reuse in order to prepare them for reuse.

Using the symbol according to Appendix 3 to the ElektroG, owners can recognize old devices that must be recorded separately from unsorted municipal waste at the end of their service life. The symbol for the separate recording of electrical and electronic equipment represents a crossed-out waste bin on wheels and is designed as follows:

2. Information on the options for returning old devices

Owners of old devices can hand them over within the framework of the options for returning or collecting old devices set up and available by the public waste disposal authorities so that the old devices can be disposed of properly. It may also be possible there to dispense electrical and electronic equipment for the purpose of reusing the equipment. You can obtain further information on this from the relevant collection or take-back point.

You can find an online directory of collection and return points here:https://www.ear-system.de/ear-verzeichnis/sammel-und-ruecknahmestellen

3. Note on data protection

Old devices that need to be disposed of sometimes contain sensitive personal data (e.g. on a PC or smartphone) that may not fall into the hands of third parties. We expressly point out that end users of old devices must take responsibility for the deletion of personal data on the old devices to be disposed of.

4. Note on our WEEE registration number

We are registered with the Stiftung Elektro-Altgeräte Register, Nordostpark 72, 90411 Nuremberg, as a manufacturer of electrical and/or electronic equipment under the following registration number (WEEE Reg. No. DE): DE 59131102.

SKU

4013 21