RC Motorcycle Losi RC Buggy RZR Rey 1:10 4WD Brushless RTR Polaris

 

Desert experience

 

The first UTVs (Utility Terrain Vehicles) of the early 2000s were work vehicles for agricultural tasks. It wasn’t long before the desert racing community began converting them into high-performance off-road race cars—for a fraction of what a full-size race car would cost. Today, these vehicles don’t have to be conversions. You can buy an affordable, race-ready off-road side-by-side (SxS) from almost any dealer.

 

Every weekend, SxS drivers gather in the dunes, the desert, on the racetrack, and on off-road courses. In their quest for more performance, they constantly make their vehicles faster and more powerful. Now, all SxS enthusiasts can enjoy the same fun anytime, anywhere with this very first 1:10 scale RC SxS from Losi!

 

Officially licensed by Polaris and modeled after the top-of-the-line SxS, the Ready-To-Run Losi Polaris RZR Pro R is built on the RZR Rey chassis—an evolution of the highly successful Losi Baja Rey chassis. Previously, the Rey was only available with independent front suspension and a solid rear axle. For the RZR Rey, the rear suspension has been faithfully redesigned with a new independent trailing-arm setup. The Polaris RZR Pro R looks and drives like the original—with superior handling in rough terrain.

 

functions

 

– Officially licensed by Polaris and designed after the top-of-the-line RZR Pro R model.

– The RZR Rey’s new independent rear trailing arm suspension offers superior cornering in rough terrain.

– The standard removal of the body with 4 clips allows easy access to the chassis for battery changes and maintenance.

– Comes with officially licensed BFGoodrich KM3 tires on officially licensed Raceline A93 Podium rims.

– Bright LEDs in the front and rear light buckets provide more realism after dark.

– Adjustable shock absorbers with long travel absorb the energy of big jumps and bumps.

– Gearboxes and differentials with metal teeth are sealed against weather influences and designed for demanding terrain.

– For the RZR Rey’s 3mm aluminum chassis plate with 2.5mm top deck, no race can be too fast and rough.

– The factory-installed Spektrum brushless drive system offers speeds of over 70 km/h with a 2S or 3S LiPo battery (not included).

– The included Spektrum DX3 remote control features Active Vehicle Control (AVC) technology for stability at high speeds.

 

 

Technical data:

 

Approximate assembly time: Less than 1 hour

Body: Polycarbonate, shielded

Brakes: Integral with ESC

Product weight: 8.5 lb (3.86 kg)

Tire profile: BFG KM3

Vehicle type: Desert buggy

Waterproof: Yes

Sprocket: 12T

Scale: 1/10

Axle ratio: 14.58:1

Motor type: Brushless

Speed ​​control: Included

Wheelbase: 14.3″ (363 mm)

Wheel width: 1.6 inches (41.3 mm)

Motor size: 3660

Charger: Sold separately

Product length: 19″ (483 mm)

Differential: Bevel gear/sealed

Spur gear: 36T

Suspension: Independent/independent trailing arm

Recipient: included

Battery: Sold separately

Connector type: IC5

Internal translation ratio: 4.16:1

Impact type: 0.38 inch (10 mm) composite material, oil-filled

Ground clearance: 1.7 inches (43.18 mm)

Vehicle size: Standard

Inner tire/outer wheel diameter: 2.2 inches

Product width: 11.4″ (290 mm)

Radio: Included

Technology: AVC and SMART

Power type: Electric

Gear ratio: 1.0 MOD

Servos: included

Ball bearings: Solid ball bearings

Chassis: 3mm, plate, 6061-T6 aluminum

Completion level: Ready-to-Run

Drivetrain: 4WD

Drive type: Forward/Brake/Reverse

Product height: 10.85″ (276 mm)

Tire compound: Medium (45A)

Wheel hexagon size: 12 mm

 

Scope of delivery:

 

(1) Losi Polaris RZR Pro R 1/10 Scale 4WD RTR

(4) AA batteries for the remote control

(1) Instructions for use

 

Required accessories:

 

(1) Compatible 2S-3S LiPo battery with EC5 or IC5 connector

(1) Compatible LiPo battery charger

 

DANGER

Use under simple adult supervision.

Not suitable for children under 14 years of age.

Details