Power station, energy storage, 1200W, 917Wh, 230V USB-C power station

Portable power station with 917 Wh capacity and UPS function. Supports eleven devices simultaneously. The built-in bidirectional pure sine wave inverter with a rated output of 1200 watts (up to 2400 watts peak) proves to be a useful emergency power source for, among other things, the central heating pump and control unit, router, desktop computer, most power tools, and many other devices. Six USB ports, including two USB-A with QC technology (max. 18 W) and two USB-C with PD (60 W) and PD (100 W) , power and repeatedly recharge smartphones, tablets, and laptops. A 12-volt outlet can power a travel refrigerator or special lighting. The two 12-volt output jacks can be used, for example, to maintain voltage in a car while the battery is charging.

• The UPS function ensures the continuous operation of connected devices during a power outage and can supply devices with a total power consumption of 500 W. In the event of a power failure, the module switches from mains power to battery power within 20 milliseconds (imperceptible to the devices).
• The energy reserve at full charge and constant consumption of 500 W is sufficient for approximately two hours of continuous operation.
• Built-in power bank with 98 Li-ion high-discharge cells in NMC/INR technology in an 18650 case with a nominal voltage of 3.6 V and a capacity of 2600 mAh (total 254800 mAh)
• Even after 500 full discharge cycles, the capacity does not drop below 80% of the initial value.
• The cells are arranged in a robust basket, the design of which ensures free air access to each cell, significantly improving cooling efficiency.
• an advanced BMS that monitors all current parameters and cell temperature in real time, thus ensuring the safety of the charging and discharging process.
• The BMS has protection functions against overcurrent, short circuit, over-discharge, overvoltage and overheating.
• The cell balancing system extends the lifespan of the entire battery.
• A special USB-C port is used to activate the cell pack – if you leave the station discharged to 0% for an extended period and the device does not respond to the connected charger, we can activate the cells and restart the station and the BMS using a 5V, 2A power supply.
• The station can be charged in three ways: thanks to a bidirectional inverter, fast charging directly from the wall socket, with a cable for the cigarette lighter or from external photovoltaic panels.
• is one of the few on the market that has a built-in MPPT charge controller , which makes it possible to fully utilize the energy supplied by the panels without shutting down the overvoltage
• Manufactured according to automotive standards

Additional Information:

• Total harmonic distortion (THD) at full load: ≤3%
• Operating time at rated load (1200 watts): 40 minutes
• Charging time from mains socket: ~1.4 h
• Charging time via cigarette lighter: ~6-9 hours
• Charging time via photovoltaic modules: ~6 h
• Continuous power output from a 230 V AC socket: 1200 W (2400 W peak)
• Cigarette lighter socket: 12 V/10 A
• 2 jack sockets: 12 V/10 A
• 2 USB-A ports: 5V/3.1A
• 2 USB-A ports: 18 W with QC technology. 3.0
• 2 USB-C ports: 60W and 100W with PD technology
• BMS protection: Overcurrent, short circuit, overcharging, over-discharging, overvoltage, overheating
• Inverter protection: Overvoltage, undervoltage, short-circuit protection
• LED light with 3 modes, including SOS, 2W
• Dimensions: 387 x 285 x 219 mm
• Weight: 12 kg
• Package contents: Station, power cable, cable for charging the product via a 12V DC installation, cable for charging the product via an external solar panel